Enclosures must remain in the cargo area or behind the rear seat.
Walls are NOT allowed.
Anyone working in the 12 volt industry or receiving discounted equipment will be considered Pro, and will have to move up to the Pro Stock classes.
CRX's, Yugo's and Panda's are NOT allowed in the Stock Classes.
16 Volt systems are NOT allowed in this class.
Maximum voltage allowed will be 15.0 volts.
Battery limits in Stock 1 allow a single 650 cubic inch or smaller battery as a main battery, and a single 800 cubic inch battery or smaller as a secondary battery. Stock 2 & 3 allow the use of all 800 cubic inch batteries, a max of two batteries in Stock 2 and 3 batteries in Stock 3. These limits include the main battery.
All factory panels must be installed in vehicle, no modifications allowed. Example would be cutting factory sheet metal to fit your amps or enclosure.
Headunit must be in the factory location, NO podiums allowed.
Power is limited to 5,000 watts.
Each class has it's own amp limit, with strapped amps allowed in Stock 2 & 3 ONLY. Refer to the chart for limits.